*** TAN PRONTO ACABE DE TRADUCIRLO LO POSTEO EN ESPAÑOL!!! ***
Learning the craft of draftsmanship is The Goal we are trying to achieve.
Structural form must be understood.
Drawing is describing form. The importance is not in the finish, but in its veracity (its truth, and accuracy of construction).
You must learn to see, not so much learn to draw.
School studies are not ends; they are means.
Until you can learn to ignore details, you won't learn to draw.
Every device must be employed to carry out accuracy of initial mapping-out of a drawing.
Whatever the form or volume, start with the ideal. Then, compare and modify your ideal to fit the model.
Where the figure rests on something, draw the imprint of the form first.
Anatomy makes it easier to interpret what you see.
Squinting is important in order to reduce the outline to its greatest simplicity. Avoid all those bumps.
Shapes and Patterns
Light and shadow in itself produces design.
Light shapes create the image; dark shapes create the pattern and the design. It is light shapes that give form; the dark shapes make the pattern.
Draw dark with one eye and with the other see the light.
Shadow shapes must describe either structure or the form on which it lies.
Lay out form and action first, then indicate the light and shadow pattern.
The shadow pattern may look right, but more often than not it is the light pattern that is wrong.
Turn your drawing upside down and ask yourself how it might be improved. A good, balanced pattern will still look good upside down.
In a drawing, try to keep open or white spaces as part of the design; they provide rest for the eye. Be aware of the positive nature of the paper left untouched. Doing thumbnail sketches will help you to see this. You can do anything with the darks so long as it is accurate where it meets the light.
See two main tonesa light area and a shadow area. Some variation within each. If you squint, you can narrow it down to two basic tones. Separate lights from shadows. Increase the contrast. Make all areas in the light a little lighter than you see them, and all areas in the shadow a little darker than you see them. the lightest light in the shadow is darker than the darkest dark in the light. The object is to make all lighted areas hold together as one group, as should the shadow areas. Otherwise, the subject will not hold together; it will lose validity.
Over modeling comes from incorrect values. One of the quickest ways to correct a problem is to clean up the light and dark areas, simplifying them. Reflected light should never be as light as the main lights. Draw them at least two values darker than anything in the light.
The eye instinctively goes to the light areas in a picture. The real problem is the half-tones: which goes to the light? Which goes to the shadow? Half tones with the light should be made lighter. Those with the shadow should be made darker. Squinting helps here. When it comes to half-tones, when it doubt, leave it out. Make certain that half-tones go around the form. If you don't, your drawing will look two-dimensional.
If two light half-tone passages appear to be equal, squint until one is almost lost to view. Obviously, the one that's almost lost to view is the lighter. Squinting prevents one from being engrossed in detail. It encompasses the total scene. Your drawing, viewed with eyes wide open, should look like the model does with your eyes half shut. Squinting also works with photographs.
Don't overstate highlightsit's a sure way to achieve over-modeling.
Eliminate lines between intercepting cast shadows, like a cat on a skylight.
Cast shadows should explain correctly the forms on which they lie.
When editing drawings at home, it should be a subtractive process: eraser, not pencil.
Eliminate where possible any lines between adjacent light and dark areas.
Consider drawing as a means of containing tone.
Strength in draftsmanship lies in the degree to which structure is depicted.
Make the paper more beautiful with every stroke added. Learn to ignore details, so that you can draw details. Look for the big, basic truths.
Construction is more important than finish.
Light and shade by themselves create design.
The pattern of light makes the drawing, the positive nature of the paper left untouched.
One can do anything with the darks as long as it is accurate where it meets the light.
There are two main tones, that of the light area and that of the shadow area.
Execute your drawing in the fewest possible values. Make certain the half-tones go around the form; get it to turn.
Line and Contour
There are two types of drawing:
1 Tone subordinated to outline
2 Outline subordinated to tone
A line is also a tone. If you use a line, make it clear whether it is a line or a tone. Emphasize construction line rather than contour line in the blocking-in of a figure.
Look for rhythmic lines that visually relate the picture or composition and rhythmic lines that create and relate forms. Enhance these effects.
When the light and shade of an object varies in clearly defined areas, it is said to have planes. If light on a form varies with no discernible boundaries, it has no planes; it is rounded. In the light, sometimes things appear too flat. These aren't just arbitrary variations of tonelook at them as planes.
Some forms (spheres, etc.) have no planes. Learn to recognize them.
A change in outline or contour is also a change in plane. Modeling of a surface should be set out in planes of tone, first larger ones, then smaller ones. Good modeling subtly fuses them together.
Gross roundness is characteristic of bad modeling. The most boring thing is a sphere. It does not exist in a human figure.
Try to determine planes that are at right angles to the light. All others will be slightly darker.
Every tone in a drawing represents a plane, facet and sub-facet, ad infinitum.
The degree of finish is a matter of how far you continue breaking down individual planes, probing for details.
Details are easy to see. It's the big form that's most difficult.
The edge of a shadow begins where planes of form turn decisively away from the light. Squint!
Determine the edge scale right at the start:
1 Softest edge
2 Hardest edge
3 Big blur or lost edge
4 All other edges that fall in between
What is the hardest edge inside the figure? What is the hardest edge outside the figure (on the silhouette)? The softest?
Big Blurthe largest area where values on the model and background are similar and where edges between are just as frequently on the light side as on the shadow side.
The degree of finish is the level to which one breaks down planes.
It is the light that will determine the character of the edges. Shadow edges in sunlight, for instance, are very hard. You can almost cut them out with scissors. Contrast this with diffused light. A point source of light (spotlight) has few half-tones and few hard edges.
Edges vary according to:
1 Conditions of the light
2 The distance from the viewer (edges become more diffuse and values become lighter the farther away a subject is from the viewer).
3 The intrinsic sharpness or softness of the object.
Soft edges always give the effect of light, and make things look luminous.
Edges are nearly as important as values. The edge of a shadow begins where planes of the form turn decisively away from the light. Ask yourself before you begin to draw:
1 What is the hardest edge inside the figure?
2 What is the hardest edge on the silhouette?
3 What is the softest edge on the silhouette?
4 What is the softest edge inside the figure?
Hard edges attract attention and make the form move forward. The best place to use them is within the light areas. The smaller the jump in value, the crisper you can make your edges.
Soft edgesmost often exist on the shadow side of the form.
Lost edgesare the softest you can make, mainly on the shadow side.
The big bluris the largest area in the picture where values on the model and background are similar and where edges between them can be softened or blurred. Edges can be lost in the light as well as in the shadow.
Try to blend or mass adjacent light and dark areas together, eliminating any lines between them wherever possible: a unifying effect. This does not have to mean the elimination of lines around the form, if wanted for delineation or for a decorative effect. Try exaggerating hard or soft edges as you follow shadow shapes.
Look for and create contrasts in value, color and edge.
Halationthe spreading of light around an object (i.e., sunlight coming in through a window sill, where two sharp edges occur and cross each other). Soften the one behind it, especially where they meet. There are only shapes, values and edges.
Go for freedom and looseness through your treatment of edges.
A studied treatment of edges yields the illusion of space. You cannot reduce these principles to a formula. If you look only for shapes and delineation, that's all you'll see. You should also look for softness, merging tones, etc. These are qualities we revere in the really good artists.
(ctrl+c)+(ctrl+v) from [link]
COMMISSIONS STILL OPEN
GRAB THEM WHILE THEY'RE HOT!!! XD
* USD 10 SINGLE CHARACTER SKETCH BLACK & WHITE
LETTER SIZE HI-RES
* USD 15 SINGLE CHARACTER LINEART.
* USD 35 SINGLE CHARACTER CELLSHADE COLOR.
* USD 50 SINGLE CHARACTER PAINT COLOR.
* DIGITAL ONLY.
* 11X 17 INCHES, 300 DPI JPEG.
* ANY EXISTING CHARACTER YOU WANT, FEMALE, MALE OR
* NO PORTRAITS OR LIKENESS.
* ANY CONTENT ( PG-13 TO XXX ).
* NOTE ME NOW!!!
* USD 10 SKETCH DE PERSONAJE EN BN TAMAÑO CARTA EN ALTA RESOLUCION
* USD 15 LINEART DE UN PERSONAJE.
* USD 35 COLOR ESTILO CELLSHADE.
* USD 50 COLOR ESTILO PINTURA.
* SOLO IMAGENES DIGITALES, NO ORIGINALES.
* IMAGENES TAMAÑO TABLOIDE EN ALTA RESOLUCION
(11 X 17 PULGADAS 300 DPI).
* CUALQUIER PERSONAJE EXISTENTE QUE QUIEREN,
HOMBRE MUJER O QUIMERA (INCLUSO WOLVERINE!!!)
* NO RETRATOS NI CARICATURAS.
* CUALQUIER CLASIFICACION (INCLUSO DESNUDOS)
* MANDENME UNA NOTA!!!
FEATURE FRIDAY (it's Wednesday, I know!!!